Archive for ST5S-BT2

Summer Sale Now on in LCR-Reader Store

// June 29th, 2018 // No Comments » // Bluetooth, Devices, LCR-Reader, LCR-Reader Store, News, Sale, ST-5S, ST5S-BT2, Uncategorized

Until July 6th, 2018, Siborg is offering a discount on LCR-Reader, LCR-Reader-MP, Smart Tweezers and other test devices in the LCR-Reader-Store.

 

 

Siborg Offers New Smart Tweezers Offset Calibration Board

// May 24th, 2017 // No Comments » // Devices, LCR-Reader, LCR-Reader Store, News, ST-5S, ST5S-BT, ST5S-BT2, Uncategorized

offsetboard_200Siborg has begun offering the Smart Tweezers Offset Calibration Board in the LCR-Reader Store.

This Calibration Board is a dummy PCB for actual offset values. The board uses holes that represent the size of components (0201, 0402, etc.).

To find the offset of the component being tested, set the Smart Tweezers or Colibri  to 10kHz and insert the tweezer tips into the holes of the corresponding component size. The device will show the actual offset capacitance value; this value can then be deducted from the value of the measured component.

Previously, users had to approximate the size of the component with the tips and note the value. This method was inaccurate and unsuitable for high accuracy.

The Offset Calibration Board is also useful for setting the automatic offset-subtraction value on Smart Tweezers models.

The Smart Tweezers Offset Calibration Board is available in the LCR-Reader Store in all Smart Tweezers Plus and Pro kits, as well as on its own.

Educational Sale on LCR-meters and Other Testers for Students and Educators in the LCR-Reader Store

// March 29th, 2017 // No Comments » // Bluetooth, Devices, LCR-Reader Store, News, Sale, Smart LED Test Tweezers, ST5S-BT, ST5S-BT2

Siborg is now offering a discount until the end of August on all multimeters, testers and accessories in the LCR-Reader store for students, educators and institutions. Discounts apply to quantities purchased.

The sale will apply to LCR-Reader and Smart Tweezers LCR- and ESR-meters, including the Smart Tweezers Bluetooth models and LCR-Reader Pro Task Kits.

The LCR-Reader Pro Task Kit includes a calibrated LCR-Reader LCR- and ESR-meter, a set of bent tweezers probes, spare battery, and NIST traceable calibration certificate. Siborg also offers different task kits for both LCR-Reader and Smart Tweezers devices; each kit combines a different amount of accessories and the price reflects a discount opposed to buying each piece separately.

Smart Tweezers Bluetooth has just been updated to include the ability to send device test signals to the Smart Twezers device. Previous models only allowed the device to send test results to PC or Apps for Android and iOS. This new update also allows the ability to set custom profiles from either previously measured values or from scratch. These profiles set a specific parameters for components to meet; when a component is measured, the receiving program either marks it as a pass or fail whether it met the parameters.

Siborg is including their other devices available including:

  • LED Test Tweezers that test LEDs and other components using an 12 VDC output and adjustable current rating of 20, 10 and 5 mA. You can also use the device as a set of tweezer-probes for multimeters by connecting it using the included cable.
  • SMD Multimeter Test Tweezers connect to most multimeters for tweezer-probe precision.
  • LCR-Reader/Smart Tweezers Kelvin Probe Connector is a shielded two-wire connector that allows Smart Tweezers and LCR-Reader devices be used as full probe stations and measure components larger than would fit between the tweezers’ probes. Siborg has recently added fine and extra-fine pin probes for use with the Kelvin Probe Connector.

Students, educators and educational institutes to visit the LCR-Reader Store from March 28th to August 31st, 2017, to get a discount on all LCR-meters, SMD devices and accessories. To qualify for the discount, students are required to show valid school I.D, while teachers can ship to their institutions or provide a P.O number.