Smart Tweezers Blog

LCR-Readers Now Accompanied by Calibration Certificates

// July 29th, 2016 // No Comments » // Devices, LCR-Reader, LCR-Reader Store, News

Over the past year, Siborg worked with the Institute of Automation and Electrometry at the Russian Academy of Sciences in creating a new calibration fixture that could handle the complete range of measurements for both Smart Tweezers and LCR-Reader. After completion, Siborg sent the fixture to one of Canada’s leading calibration houses for verification. Once verified, Siborg was able to offer periodic calibration with certificate for LCR-Readers when the device and a certificate were purchased together in the LCR-Reader Store. 

Siborg also created new task kits, including the LCR-Reader Professional that included the certificate as well as spare bent tweezer-tips and an extra battery.

Siborg is now offering NIST Traceable Calibration Certificates with every LCR-Reader without any extra cost.

The lack of traceable periodic calibration was a hindrance for professionals that were looking for a tool like Smart Tweezers that offers a certificate, but did not agree with the high price.

Check out the LCR-Reader Store for all Siborg’s offerings:

• LCR-Reader
• LCR-Reader Task Kits: pre-bundled options that offer customers a device and accessories with a lower price than buying each piece separately
• Smart Tweezers ST-5S
• Smart Tweezers ST5S-BT: Bluetooth enabled Smart Tweezers that can record measurement results in real-time
• Smart Tweezers Task Kits
• SMD Multimeter Test Tweezers: add tweezer-like precision to any multimeter
• LED Test Tweezers: Tweezer testing for LEDs, switches, fuses, etc. Comes with a special connector cable that connects the device to a multimeter
• LCR-Reader Probe Connector: Turns LCR-Reader and Smart Tweezers into a probe station for complete PCB probing, as well as extends the abilities of the devices to measure components that would not fit between the tweezers

Siborg to Begin Offer Bluetooth Enabled Smart Tweezers

// April 28th, 2016 // No Comments » // Devices, LCR-Reader, LCR-Reader Store, News, ST5S-BT, Uncategorized

Siborg Systems Inc. will be offering a new model of Smart Tweezers with Bluetooth capabilities in mid-May, the ST5s-BT.

This is the first upgrade to the ST-5S, which will allow users to remotely log their measurement results with a compatible device. This will be more efficient by letting users keep track of their previously measured components rather than re-measuring each time.

The Bluetooth is connected using a USB receiver stick that establishes a virtual serial port. Measurements results are sent using a string of comma separated values that represent the measurement results.

Ex. C1.398nF,R3.461kR,10kHz,0.5,S,,,,
C(main impedance value type)1.398nF(main impedance value),R(secondary impedance)3.461kR(secondary impedance value),10kHz(test frequency),0.5(test signal level),S(measurement mode, in this case, serial), followed by 4 reserved values.

This information is then sent to the port and is received by any communication software.

For example, the photo shows the free Terra Term software receiving data. This data can be save into a file or documented. If the LabView software is being used, it can process and store the data in a database as needed.

The Bluetooth connection will be supported by an NI VISA instrument driver in the NI LabView® environment. Eventually the device will have Apps for the Windows, Android and iOS operating systems.

Smart Tweezers ST-5S is a hand held LCR-meter with high accuracy and plenty of features for specific tasks. These features include: fully automatic LCR and ESR measurements, variable tolerances and test signal ranges, basic accuracy of 0.2%, component sorting, diode and continuity testing, and offers a 4-way joystick-like-navigation that allows basic settings to be changed quickly on the default screen.

The new ST5S-BT will be available starting mid-May from Siborg’s LCR-Reader Store and Amazon sales channels in USA, Canada and Europe.